I spent most of the morning collecting parts today. First, I stopped by Six States and picked up the pressure plate and friction plate. As promised, they did them both for under a hundred dollars… SWEET!

Then, I picked up the radiator and fuel tank from Intermountain Radiator

And Finally, I stopped by Crown Plating, and collected the engine tin that I had acid dipped and chrome stripped.

I dropped the clutch friction plate and pressure plate off at Six States to be redone. They seemed to think that they would be able to overhaul both for under a hundred dollars….fingers crossed! The pressure plate didn’t look terrible, but being so old, the spring tension concerned me. The friction plate, however, was in sad shape; oil soaked and unevenly worn.

After returning home from Six States, I spent some time on the internet researching parts suppliers and engine coding information. I made a great discovery when I happened upon the Hillman Club of South Australia website and found this engine code page which linked to this page from Team.net. It was all the engine number information I would even need, thank you MR. INTERNET! But the discovery soon proved to be bitter sweet. It seems that the engine in our 1959 Rapier series 2 ( B1008462 H LSX) was originally from a Hillman Minx Series 111A De-Luxe Special (09/23/59). Major bummer, especially since the motor was suppose to be original.